The last steps are installing the hard drive and the CD-ROM drive. The case has a removable bracket with four rubber grommets on it, which line up with four holes on the hard drive. It also came with four screws made just to punch through those grommets. Screw the hard drive into the bracket, then put the bracket back into its slot in the case. If you are using IDE/PATA drives, be sure to set the jumpers correctly. Then connect the hard disk to the power using one of the connectors coming off of the power supply. If it fits, then it's a match.

Now install the cables. One side of the cable has a red stripe on it, which makes it " pin 1." Look on the motherboard and hook the cable into the IDE connector marked "1." Insert the other end of the cable on the back of the drive. Now the drive is ready to go.

Install the CD-ROM drive next. Again, set the jumpers correctly. The drive fits in the front of the case, and you may have to pop out a faceplate to make room for it. Slide it in and screw it into place, making sure that it's aligned with the front of the case. Just as with the hard drive, you can use any available connector from the power supply. You'll also use the cable that came with the CD-ROM drive to connect it to the motherboard (align the red stripe for "pin 1") and plug the other end into the drive. Connect the audio for the CD drive. Again, there's an obvious place for it to plug in on the motherboard and on the drive itself.

Placing the hard drive into its bracket.

If you're using a video card, now you'll install it as well. Our motherboard has an AGP video slot so we have an AGP video card. The motherboard only has one video card slot, so you should be able to find it easily (you can also use the manual). Line up the card with the slot and push it into place. If the video card has its own power connector, connect it to the power supply. If the case has extra fans, make sure they have power too.

Now you can close up the case and add a monitor, keyboard, mouse and speakers. In the next section, we'll cover what to do after powering up the computer and what steps to follow if it doe